- Research article
- Open Access
There is more than one way to turn a spherical cellular monolayer inside out: type B embryo inversion in Volvox globator
BMC Biology volume 9, Article number: 89 (2011)
Epithelial folding is a common morphogenetic process during the development of multicellular organisms. In metazoans, the biological and biomechanical processes that underlie such three-dimensional (3D) developmental events are usually complex and difficult to investigate. Spheroidal green algae of the genus Volvox are uniquely suited as model systems for studying the basic principles of epithelial folding. Volvox embryos begin life inside out and then must turn their spherical cell monolayer outside in to achieve their adult configuration; this process is called 'inversion.' There are two fundamentally different sequences of inversion processes in Volvocaceae: type A and type B. Type A inversion is well studied, but not much is known about type B inversion. How does the embryo of a typical type B inverter, V. globator, turn itself inside out?
In this study, we investigated the type B inversion of V. globator embryos and focused on the major movement patterns of the cellular monolayer, cell shape changes and changes in the localization of cytoplasmic bridges (CBs) connecting the cells. Isolated intact, sectioned and fragmented embryos were analyzed throughout the inversion process using light microscopy, confocal laser scanning microscopy, scanning electron microscopy and transmission electron microscopy techniques. We generated 3D models of the identified cell shapes, including the localizations of CBs. We show how concerted cell-shape changes and concerted changes in the position of cells relative to the CB system cause cell layer movements and turn the spherical cell monolayer inside out. The type B inversion of V. globator is compared to the type A inversion in V. carteri.
Concerted, spatially and temporally coordinated changes in cellular shapes in conjunction with concerted migration of cells relative to the CB system are the causes of type B inversion in V. globator. Despite significant similarities between type A and type B inverters, differences exist in almost all details of the inversion process, suggesting analogous inversion processes that arose through parallel evolution. Based on our results and due to the cellular biomechanical implications of the involved tensile and compressive forces, we developed a global mechanistic scenario that predicts epithelial folding during embryonic inversion in V. globator.
One of the most fascinating problems in developmental biology is how embryonic cells work together to produce highly organized multicellular organisms. Although embryonic tissues may ultimately be shaped in a species-specific manner, there are basic remodeling events that are shared, even among distantly related species. Epithelial folding is one of these common morphogenetic processes and is involved in metazoan developmental stages including gastrulation, neurulation and organogenesis. Epithelia are composed of closely arranged epithelial cells that adhere together at intercellular junctions that give the epithelial sheet mechanical strength. This adherence of the cells is thought to be the key for the transmission of forces between neighboring cells through the links between the actomyosin cytoskeleton and the adherens junctions . In metazoan development, folding or bending of the cell sheet is achieved by cells at the bend points that change from a cuboidal to a wedge shape. This cell wedging is observed in several invaginations, including blastopore groove formation and neurulation in amphibians and the formation of the primitive groove in birds [1–7]. It also exists in other cases, such as gastrulation in some echinoderms , but is less obvious in these cases, likely because mechanisms other than cell wedging are involved . The bending and folding of a sheet of cells is fundamentally a biomechanical, supercellular process involving coordinated changes in the shapes of many neighboring cells that interact; however, the biological and biomechanical processes that underlie such three-dimensional (3D) morphogenetic events in metazoans are usually complex and difficult to investigate [2–7, 9–19].
In the simple multicellular green algae Volvox, a morphogenetic process known as inversion occurs during embryogenesis. Volvox inversion bears significant similarity to metazoan gastrulation and has been suggested as a model system for studying the curling of an epithelium [20–25]. The similarities between the morphogenetic process of inversion in Volvox carteri and epithelial folding events in metazoans include cell adherence, cell shape changes, cell movements, transmission of forces between neighboring cells and the involvement of cytoskeletal elements [20, 22–24, 26–29]. However, embryonic Volvox cells have no adherens junctions; instead, they adhere together through a network of numerous and quite robust cytoplasmic bridges (CBs) that are the result of incomplete cytokinesis  and allow for force transmission. As in metazoans, folding or bending of the embryonic cell sheet in V. carteri is achieved by cells at the bend points, which undergo a distinct transition in cell shape [20, 22–24, 26–29]. Moreover, concerted movements of cells with respect to the CB system are crucial for the process of inversion in V. carteri [20, 22–24, 26–29].
Most previous research on inversion was performed in V. carteri [20–25]; however, this process also occurs, but has been studied in much less detail, in other species of the genus Volvox such as V. tertius [30–32], V. obversus [33, 34], V. aureus [35, 36], V. globator [37, 38], V. rousseletii [38–40] and V. capensis . Inversion also exists in more basal volvocine relatives of Volvox [25, 41], such as Pleodorina californica , Eudorina elegans [43–45], E. indica , Pandorina morum , Platydorina caudata  and Gonium pectorale [44, 49, 50], even if the process is less distinct in these species.
Inversion is the solution to the awkward inside-out situation of the embryo in multicellular volvocine algae. After completion of embryonic cleavage divisions, the embryo contains all of the cells that will be present in the adult alga, but the flagellar ends of all of the cells point toward the interior, rather than the exterior, where they need to be to function during locomotion. Moreover, in more advanced species, which already exhibit large reproductive cells before inversion (for example, V. carteri), the reproductive cells point outward. This inside-out orientation is corrected as the embryo turns itself right-side out during inversion.
The process of inversion was discovered in V. carteri f. weismannia approximately 100 years ago, but it was initially misinterpreted as a pathological phenomenon . The correct interpretation of inversion was provided by Kuschakewitsch approximately a decade later [52, 53]. Subsequent work revealed that inversion in Volvox involves two cellular events: dramatic changes in cell shapes and coordinated movements of cells relative to the CBs [20–24, 26–29, 31, 54–57]. However, there are two fundamentally different sequences through which embryos of the genus Volvox turn right-side out: type A and type B (Figure 1) [25, 58]. In type A inversion, which occurs in V. carteri and species such as V. obversus, V. africanus, V. gigas and V. tertius, an opening, called the phialopore, appears at the anterior pole; the anterior hemisphere inverts through the phialopore; the posterior hemisphere then inverts; and finally, the phialopore closes (Figure 1A) [22, 32–34, 54]. (It should be noted that by convention, the anterior pole of a pre-inversion embryo becomes the posterior pole of the inverted embryo [22, 25].) In type B inversion (Figure 1B), as observed in species such as V. globator, V. capensis, V. dissipatrix, V. rousseletii and V. barberi, the posterior hemisphere inverts before the phialopore opens, followed by inversion of the anterior hemisphere; finally, the phialopore closes [26, 38–40]. Thus, in type B inversion, the opening of the phialopore does not indicate the beginning of inversion, and the hemispheres invert in reverse order compared to type A inversion.
In terms of evolution, inversion must have arisen quite recently because phylogenetic analyses indicate that multicellularity evolved in volvocine green algae 'only' approximately 200 million years ago , which is much more recently than in any other group, and inversion must have evolved in parallel with the transition to multicellularity or even later. Phylogenetic analyses have also indicated a polyphyletic origin of the genus Volvox [22, 60–66] (see Additional File 1) suggesting that it is not a true genus. A few species of this genus, including V. globator, form a small but robust monophyletic group that is referred to as the section Volvox [58, 62, 64, 67, 68]. All Volvox species within the section Volvox exhibit type B inversion (see Additional File 1). The other species of the genus Volvox and the genera Eudorina and Pleodorina constitute another, much larger, monophyletic group, the Eudorina group [58, 69]. The Volvox species within the Eudorina group include both type A and type B inverters (see Additional File 1).
The type A inversion of V. carteri has been analyzed previously in great detail (Figure 1A) [20, 23–27, 29, 70–74]. Inversion in V. carteri begins about 1 h after the end of embryonic cleavages with the appearance of a swastika-shaped phialopore at the anterior pole of the embryo (Figure 1A1, A2). At this opening, the four lips of the cell monolayer curl outward and backward over the simultaneously contracting posterior hemisphere (Figure 1A2, A3, A4, A5, A6, A7, A8). During inversion, the circular region of maximum cell-sheet curvature moves progressively along the anterior-posterior axis. Finally, the phialopore closes, and the embryo regains its spherical phenotype (Figure 1A9, A10). The flagellar ends of the somatic cells now point outward, and the reproductive cells (gonidia) point inward. The entire inversion process lasts approximately 45 min [23, 25]. Analyses of the cytological changes that occur during this epithelial folding using light microscopy (LM), transmission electron microscopy (TEM) and scanning electron microscopy (SEM) have led to the development of a model that describes inversion in V. carteri based on cell shape changes and active movements of cells relative to the CBs connecting them [20, 21, 27, 28]. At the beginning of inversion in a V. carteri embryo, all cells are spindle shaped and are joined at their widest points by CBs . The cells surrounding the phialopore first develop long, microtubule-reinforced stalks. In V. carteri, a motor protein, the kinesin InvA, is thought to generate the force that drives the movement of the cells relative to the CBs until they are linked at their narrowest, outermost tips [24, 25, 27]. These combined actions cause the phialopore lips in V. carteri to bend outward. All cells gradually undergo these changes in cell shape, and a ring of maximum curvature, known as the bend region, moves from the anterior to the posterior pole until inversion is completed (Figure 1A). After passing the region of maximum curvature, the cells, which are linked by their inner ends, develop a columnar shape.
In contrast to the type A inversion of V. carteri, type B inversion has only been studied by LM and, therefore, only basic information about the sequence and mechanism of inversion in type B inverters is available [25, 26, 36–38, 54, 75]. Although the subcellular mechanisms underlying inversion might be similar in type A and type B inverters, there must be significant differences between the two types of inversion to explain the different inversion sequences observed.
Therefore, in the present study, we provide a detailed description of the cellular mechanism of type B embryonic inversion in Volvox globator, compare type A inversion (as previously studied in V. carteri) and type B inversion (as studied here) in terms of the key similarities and differences in the cellular events that are involved, deal with the pathways by which these two types of inversion may have evolved and discuss a hypothesis that integrates our results and biomechanical implications about the involved tensile and compressive forces into a global mechanistic scenario that predicts epithelial folding in V. globator.
Epithelial folding of the typical type B inverter V. globator (Figure 1) was investigated in detail, focusing on major movement patterns of the cellular monolayer, region and stage-specific changes in cell shape and changes in the localization of CBs. To describe the major aspects of inversion separately but in ontogenetic order of appearance, we go through the inversion process several times by calling attention to the relevant panels of Figures 2, 3, 4 and 5; each of these figures shows an image series of inversion in ontogenetic order made with four different techniques: LM time-lapse in vivo imaging (Figure 2), SEM (Figure 3), LM of mechanical, midsagittal sections (Figure 4) and optical sections by confocal laser scanning microscopy (cLSM) (Figure 5).
Major movement patterns of the cellular monolayer
At the stage immediately (5 min to 10 min) before the beginning of inversion, a V. globator embryo is fully cleaved. The embryo completed 11 to 13 rounds of cell division and has 2,000 to 6,000 cells arranged in a spherical cellular monolayer with a diameter of approximately 80 μm (70 μm to 90 μm) (Figures 1B1, 2A, 3B, 4A and 5A). At this time, the spheroidal embryo exhibits sporadic movements of the cell monolayer, and several dents quickly appear and disappear (Figure 6A). This phenomenon was also observed in V. carteri, V. aureus and V. rousseletii embryos and is known as 'denting' [20, 26, 39]. Denting ends once the process of inversion starts.
Early inversion stage
The inversion process begins with the contraction of the posterior hemisphere of the embryo (Figures 1B2, 2B and 4B). During the first approximately 10 min of inversion, contraction proceeds and accompanies movement of the posterior hemisphere in the direction of the anterior pole; thus, the posterior hemisphere moves into the anterior hemisphere (Figures 1B2, B3, 2B, C, D, E, F, 3C, 4B, C and 5B). This ring-shaped invagination of the cell sheet generates the bend region (Figures 1B3, 2B, C, D, 3C, 4B, C and 7A). In midsagittal cross-sections of embryos at this stage, the bend region forms more or less a half circle with a radius of approximately 2 μm (Figure 7H).
The mid-inversion stage spans from approximately 10 min to approximately 35 min after the beginning of inversion. Approximately 15 min to 20 min after the initiation of inversion, the posterior hemisphere lies completely within the anterior hemisphere and moves further yet toward the anterior pole (Figures 1B4, 2G, H, I, J, K, 3D, E, 4D, E, F and 5C). During this movement of the posterior hemisphere, the radius of the curvature in the bend region increases considerably from 3 μm to 5 μm up to 15 μm to 20 μm within approximately 10 min (Figure 8C, D). Approximately 20 min to 25 min after the beginning of inversion, a circular opening, the phialopore, appears at the anterior pole (Figures 1B5, 2G, H and 3F). The phialopore widens continuously while the anterior hemisphere moves over the already almost completely inverted posterior hemisphere (Figures 1B5, B6, 2H, I, J, K, L, 3F, 5C and 8B). The inner diameter of the opening increases until it is somewhat greater than the outer diameter of the inverted posterior hemisphere (Figures 1B6 and 2K, L).
Late inversion stage
During the late stage of inversion, 35 min to 45 min after its onset, the last third of the anterior hemisphere moves over the already inverted cell monolayer (Figures 1B7, B8, B9, 2L, M, N, O, 3G, 4G, 5D and 9A, B, C). During this last part of inversion, the diameter of the opening decreases continuously (Figures 1B9 and 2L, M, N, O). Approximately 50 min after it started, inversion ends with the closure of the phialopore (Figures 1B10 and 2O, P).
Early and late post-inversion stage
Immediately after inversion, the embryo has a diameter of only approximately 60 μm (50 μm to 70 μm) (Figures 2P, 3H, 4H and 5E), which is approximately 20 μm less than at the initiation of inversion (Figures 2A, 3B, 4A and 5A). Not only before (see above) but even shortly after the completion of inversion, we observed sporadic movements of the cell monolayer causing dents that quickly appear and disappear (Figure 10H, I). To our knowledge, this denting after inversion has never been observed in any other Volvox species. Approximately 1 h after the completion of inversion, denting is no longer observed (Figure 10J), and the juveniles remain spheroidal.
Region and stage-specific changes in cell shape
During cleavage, all cells are roughly spherical or, particularly immediately before each cleavage division, somewhat elongated (Figure 3A). The cells exhibit a length of 4.5 μm to 6.5 μm and a width of 2.5 μm to 5 μm. Between the end of cleavage and the beginning of inversion, all cells within the spherical cellular monolayer develop into what we refer to as teardrop-shaped cells (Figures 3B, 4A, 5A1, A3, and 6B, C, D, E, F). Each of these approximately radially symmetrical cells is cone-shaped at the cell end that faces the interior (Figure 6B, D, F); we refer to the cone-shaped (apical) end of the cell as the flagellar end because the flagella will develop on this side of the cell. The opposite end of the teardrop-shaped cells, facing the exterior, shows a roughly hexagonal cross-section (Figure 6E); we call this end of the cell the chloroplast end because the single chloroplast largely localizes on this side of the cell. Teardrop-shaped cells have a length of 8 μm to 10 μm and a maximal width of 3 μm to 5 μm.
For all optical sections of embryos, we used phalloidin-tetramethylrhodamine B isothiocyanate (TRITC) as a cytoplasmic stain because it stains filamentous actin (F-actin) in embryonic cells , and F-actin was more or less uniformly distributed in the cytoplasm (both in this and in a previous study , the resolution of the cLSM was insufficient to see individual actin filaments). However, there was one exception: in teardrop-shaped cells, F-actin was mainly localized at the flagellar (apical) ends of the cells (Figure 6B, C).
Early inversion stage
At the beginning of inversion, the cells of the anterior hemisphere remain teardrop shaped (Figure 4B, C), but the cells of the posterior hemisphere become elongated along their chloroplast-end-to-flagellar-end axis. The latter cells attain a length of 10 μm to 12 μm with more or less pointed ends on both sides; therefore, these cells are referred to as spindle-shaped cells (Figures 4B, C, 5B1, B3 and 7C, I). At the cell's equator, which is the broadest point, the spindle-shaped cells have a diameter of 2 μm to 3 μm and exhibit a hexagonal cross-section (Figure 7C and inset in 7C).
The conversion of teardrop-shaped cells into spindle-shaped cells in the posterior hemisphere occurs in conjunction with the formation of the bend region somewhat below the equator of the embryo (Figures 1B1, B2, 2A, B, 3C, 4B, C and 7H). In the emerging bend region, the shapes of the just developed spindle cells changes again and increasingly reflects the maximum curvature of the cell sheet in this area. The elongated cells of this region stay pointed and radially symmetrical only at their flagellar ends, whereas they become increasingly wedge-shaped at their chloroplast ends; we refer to these cells as paddle-shaped cells. In a cross-section of the embryo, the cells of the bend region are arranged in the form of a spread fan (Figures 4C and 7H), exhibit a length of 9 μm to 10 μm and are approximately 2 μm to 3 μm in diameter at the broadest point (Figure 7D). At the outermost chloroplast ends, the major axis of the cell's cross-section is 1.5 μm to 2 μm, while the minor axis is only approximately 0.5 μm (middle part of Figure 7A, B); that is, there is a difference in length by a factor of three to four between the two axes. The bases of the cells at the chloroplast ends frequently appear as elongated hexagons. The major axis of these elongated hexagons at the outermost chloroplast ends of paddle-shaped cells is oriented along a circular line described by the ring-shaped invagination of the posterior hemisphere; this circular line shows only minor curvature due to its relatively large radius of approximately 30 μm. The minor axis of the outermost chloroplast end of paddle-shaped cells is perpendicular to the circular line around the embryo and is oriented along a line that more or less forms a half circle in the bend region when a midsagittal cross-section of an embryo is observed (Figures 4C and 7H).
While invagination of the posterior hemisphere proceeds and the transition from spindle to paddle shapes progresses from the equator toward the posterior pole, the teardrop-shaped cells of the anterior hemisphere become increasingly elongated flat cells that partially overlap each other. The conversion from teardrop-shaped to elongated progresses from the rim of the anterior cap of the embryo toward its anterior pole. We refer to the elongated flat cells as disc shaped (Figures 4B, C and 7A (upper right part of the image) and 7G). However, these cells are not uniformly shaped, and quite a few are buckled. Disc-shaped cells are elongated in the anterior-posterior direction of the embryo and frequently have a length of 4 μm to 6 μm, a width of 2 μm to 3.5 μm and a height of 0.8 μm to 2 μm.
At the beginning of the mid-inversion stage, the cells in the bend region still have the appearance of paddles that are flattened at one end (the chloroplast end) and are arranged in the form of a spread fan (Figures 4D and 8A, C) but at this stage, these cells have a length of 11 μm to 12 μm and, thus, are longer than the corresponding cells in the early inversion stage. The bases of the paddle-shaped cells at the chloroplast ends still have the appearance of elongated hexagons (Figure 8A).
In the mid-inversion stage, the transition from the remaining spindle to paddle cells seems to progress from the equator of the embryo toward its posterior pole and, as mentioned above, the radius of the curvature in the bend region increases considerably. The greater that the radius of the curvature in the bend region is, the thicker the chloroplast ends are on their narrow side (Figures 4D, E and 8C, D). With a further increase of this radius, the paddle-shaped cells change into cells that are radially symmetrical throughout their length (Figures 4E, F and 8D); these cells still have pointed flagellar ends but the bases of the cells at the flattened chloroplast ends appear as elongated hexagons (Figures 4E, F and 8A, D, F), and we refer to these cells as pencil shaped. Pencil-shaped cells have a length of 11.5 μm to 12.5 μm and a diameter of 1.5 μm to 2 μm (at the chloroplast end).
During most of the mid-inversion stage, cells close to the not yet inverted posterior pole are still spindle-shaped (Figure 4D, E). When these cells have their turn in inversion, the radius of the curvature in the bend region reaches its maximum. These spindle-shaped cells do not seem to become paddle shaped but directly change into the pencil shape (Figure 4D, E, F).
Before inversion of the posterior hemisphere is complete, disc-shaped cells at the rim of the anterior cap become increasingly pencil shaped (also without passing through the paddle stage) and, at the same time, seem to move over the rim of the anterior cap toward the posterior pole (Figures 3E, F, G, 4C, D, E and 5C1, C3). This process appears to be the initiation of inversion of the anterior hemisphere. Shortly after the beginning of the change from disc to pencil shape at the rim of the anterior cap, the phialopore appears at the anterior pole and the opening widens continuously. The transition from disc to pencil shape seems to progress toward the phialopore. Disc-shaped cells around the phialopore alone become increasingly elongated along a circular line described by the edge of the opening (Figures 3F and 8B). Cells in the not yet inverted part of the anterior hemisphere are still disc shaped (Figures 4E, F, 5C1, C3 and 8E).
Late inversion stage
During this last stage of inversion, the remaining disc-shaped cells of the not yet inverted portion of the anterior hemisphere become pencil-shaped (Figures 3G, 4G, 5D1, D3 and 9A, C, D, F) and simultaneously seem to move over the rim of the remaining portion of the anterior cap. In the late inversion stage, pencil-shaped cells have a length of 11.5 μm to 12.5 μm, are 1.5 μm to 2 μm in diameter, have a more or less hexagonal base at their chloroplast ends (Figure 9H, I, J) and show pointed flagellar ends (Figure 9J). Once all cells changed into pencil shape, the phialopore closes and inversion is completed.
Early and late post-inversion stage
Right after inversion is complete, the cells of the embryo change their shape again, but this time all cells do it concertedly. The pencil-shaped cells become shorter and end up at a length of 4.5 μm to 6.5 μm and as a result the diameter increases to 2 μm to 4 μm (Figures 3H, 4H, 5E1, E3 and 10A, C, D, E, F, G). We refer to these cells as column shaped. The column-shaped cells present a hexagonal cross-section along their entire length, except for at the slightly rounded flagellar ends, while the chloroplast ends are flattened (Figure 10C, D).
Approximately 1 h after the completion of inversion, the cell shapes change for the last time: all the column-shaped cells gradually develop into what we refer to as gemstone-shaped cells (Figures 5F1, F3 and 11A). At the flagellar end, these cells exhibit shapes similar to flat, radially symmetrical cones but have more or less hexagonal bases at their chloroplast ends. The cells with the final gemstone shape have a diameter of 4.5 μm to 5 μm and a height of 5 μm to 6 μm.
Region- and stage-specific changes in the locations of CBs
Early inversion stage
In early inversion, the teardrop-shaped cells of the anterior hemisphere are still connected at their chloroplast ends, but the cells of the posterior hemisphere with the just developed spindle shape have their CBs in the equatorial region of the cells (Figure 7C and inset in 7C). At the same time that the bend region forms between the two hemispheres, the spindle-shaped cells in the equatorial region of the embryo seem to move concertedly relative to the CB system until the CBs localize at their chloroplast ends; this transition seems to progress from the equator of the embryo toward its posterior pole. Cells in the bend region with the just developed paddle shape exhibit CBs only at their outermost chloroplast ends (Figure 7A, B, D, E, H), which allows for the smallest possible radius of the curvature of the cell monolayer. In disc-shaped cells, which result from the conversion of teardrop-shaped cells in the anterior hemisphere, the cytoplasmic connections to other cells are found at the edges of the discs (Figure 7A (upper right part of the image) and 7G).
Despite beginning the inversion process, the V. globator embryo is still connected with the parent spheroid (in contrast to the V. carteri embryo ). In the V. globator embryo, a ring of cells at the anterior pole maintain CBs to the somatic cells of its parent (Figure 7F).
Inversion progresses during the mid-inversion stage, and the CBs localize in spindle-, paddle- and disc-shaped cells just as described for the early inversion stage. The CBs of the just developed pencil-shaped cells of the already inverted posterior hemisphere localize at their outermost chloroplast ends (Figure 8F), just as in paddle-shaped cells.
When the phialopore opens in the mid-inversion stage, the CBs between cells at the anterior pole of the embryo and somatic cells of its parent break off mechanically. While the phialopore widens continuously, the CBs around the phialopore become elongated along a circular line described by the edge of the opening (Figure 8B). These elongated CBs reach a length of up to 10 μm.
Late inversion and post-inversion stage
During the last part of the inversion process, the CBs localize in disc- and pencil-shaped cells (Figure 9H, I) just as described above. After inversion, CBs connect the just developed column-shaped cells (which result from the conversion of pencil-shaped cells) at the chloroplast ends (Figure 10F). All cells remain interconnected by CBs after inversion and throughout their lifetime (in contrast to cells of V. carteri ).
Changes in shapes of nuclei, growth of flagella and biosynthesis of extracellular matrix
Before inversion, the nuclei of all teardrop-shaped cells are either spherical or somewhat conical and are localized at the flagellar ends of the cells; the nuclei have a diameter of 3 μm to 4 μm (Figures 5A2, A3 and 6C). During inversion of a V. globator embryo, the shapes of the nuclei undergo major changes (in contrast to the nuclei of a V. carteri embryo ), but the shapes always reflect the shapes of the corresponding cells (Figures 5B2, B3, C2, C3, D2, D3, E2, E3, 9B, E, G and 10B). Nuclei of spindle-, disc-, paddle-, pencil- and column-shaped cells are elongated along the chloroplast-end-to-flagellar-end axis and have a length of 3 μm to 5 μm and a width of 1 μm to 2.5 μm (Figures 5B2, B3, C2, C3, D2, D3, E2, E3, 9B, E, G and 10B). The nuclei of gemstone-shaped cells are spherical with a diameter of 2 μm to2.5 μm (Figures 5F2, F3 and 11B).
The outgrowth of the flagella starts around the beginning of embryonic inversion. In the early inversion stage, cells of the embryo show short flagellar stubs, approximately 2 μm in length, at their flagellar ends (Figure 7C, D, G). During inversion, the flagella of a V. globator embryo grow continuously (in contrast to the flagella of a V. carteri embryo ), from approximately 2 μm to around 15 μm to 17 μm at the stage immediately after inversion (Figure 10D). In adult spheroids, the flagella reach a length of 20 μm to 25 μm; thus, immediately after inversion, the flagella have reached two-thirds of their final length. However, these growing flagella have already begun to beat; therefore, the juveniles rotate (slowly) within the parent spheroid.
The synthesis of extracellular matrix (ECM) begins at approximately the end of inversion. The main zones and subzones of the ECM are detectable even in this early stage of ECM synthesis (Figure 10G) [77, 78]. In particular, the characteristic ECM subzone cellular zone 3 (CZ3) becomes apparent; CZ3 consists of coherent fibrous material that creates honeycomb-like chambers at a significant distance around individual cells (Figure 10G). After inversion, the juveniles continuously grow in size by depositing increasing amounts of ECM. The rapid growth of juveniles after inversion is only affected by the secretion of ECM material, which causes each cell to move away from its neighbors (Figure 11).
Modeling of cell shapes, CB locations and illustration of the entire inversion process
To model cell shapes, the locations and dimensions of numerous cells on LM, cLSM, SEM and TEM images of intact and sectioned embryos were determined before, during and after inversion (see Methods). Based on these results, we developed 3D models with consensus cell shapes for the teardrop-, spindle-, disc-, paddle-, pencil-, column- and gemstone-shaped cells (Figure 12A, B, C, D, E, F, G). Moreover, we determined the locations of CBs for each cell shape, particularly in relation to the chloroplast-end-to-flagellar-end axis (Figures 12A, B, C, D, E, F, G), and we established consensus curvatures of the cell monolayer throughout all stages of inversion using LM, cLSM and SEM images.
Based on all of our findings, we developed a summary model for the complete process of embryonic type B inversion in V. globator, which is presented in Figure 13. The model includes the localization of the observed cell shapes; the directions of cell layer movements; the relative position of the CB system; the length of flagella; and the localization and shapes of nuclei during the pre-, early, mid-, late and post-inversion stages. The summary model is discussed below.
Comparison of the type A and type B inversions
When the type B inversion of V. globator is compared to the type A inversion of V. carteri, both similarities and differences are apparent (Table 1). The sequence of the major movement patterns of the cellular monolayer is quite different in both species. In V. carteri embryos, the phialopore opens; the anterior hemisphere inverts; the posterior hemisphere contracts; the posterior hemisphere inverts; and finally, the phialopore closes [20, 22, 26] (Figure 1A). In V. globator embryos, the posterior hemisphere contracts; the posterior hemisphere inverts; the phialopore opens; the anterior hemisphere inverts; and the phialopore closes [25, 36, 37] (Figures 1B and 13).
The presence of CBs between the cells of the embryo's cell monolayer and the coordinated movements of cells relative to the CB system appear to be essential for inversion in both V. carteri [20–22, 24, 27–29] and V. globator. Likewise, cell shapes and the order of coordinated cell shape changes are important for a successful inversion of embryos in both species. However, the order of the coordinated shape changes is different between the species, and the shapes also show differences. In V. carteri embryos, all cells are spindle shaped immediately before inversion [20, 22]. V. globator embryos exhibit spindle-shaped cells only in the contracted posterior hemisphere, whereas cells in the anterior hemisphere are teardrop-shaped (Figure 12A, B and Table 1). The presence of flask-shaped cells in the bend region during inversion is characteristic of V. carteri embryos [20, 22, 24]. The long 'bottlenecks' of these cells, which localize at the chloroplast ends of the cells, are radially symmetrical. The paddle-shaped cells in the bend region of inverting V. globator embryos (Figure 12D) resemble the flask-shaped cells in the bend region of V. carteri embryos, in particular because both are arranged in the form of a spread fan. However, paddle-shaped cells are not radially symmetrical at their chloroplast ends but instead are wedge shaped (Figure 12D and Table 1), and they present no bottlenecks or stalks. Cells that have passed the bend region in V. carteri embryos are column shaped [20, 22]. V. globator cells at the same developmental stage are pencil shaped (Figure 12E and Table 1), which means that these cells are more elongated along the chloroplast-end-to-flagellar-end axis than the corresponding cells in V. carteri. In V. carteri embryos, all (somatic) cells undergo the same consecutive cell shape changes from spindle to flask to column shaped [20, 22]. In V. globator embryos, the posterior and anterior hemispheres invert associated with different cell shapes and a different order of shape changes. In the posterior hemisphere, embryonic cells change from teardrop to spindle to paddle (except for the cells close to the posterior pole) to pencil and then to column shaped. In contrast, cells from the anterior hemisphere change from teardrop to disc to pencil and then to column shaped (Figure 12).
In V. globator, cells appear to change their total volume during inversion, but it is unknown how this change occurs. Changes in volume might be achieved by emptying or filling contractile vacuoles; alternatively, cells might change their volume by exporting or importing cytoplasm to or from their neighbor cells through the CB system. In contrast, the cell volume is constant throughout inversion in V. carteri .
In a V. carteri embryo, inversion begins at a defined point at the anterior pole of the spheroid; the phialopore opens, and from this opening dramatic changes in cell shapes and coordinated movements of cells with respect to the CB system proceed from the anterior pole to the posterior pole  (Figure 1A). In contrast, a V. globator embryo shows a ring-shaped initiation of inversion somewhat below the equator of the spheroid. Changes in cell shape and coordinated movements of cells relative to the CBs start somewhat below the equator and proceed to the posterior pole; then a second process with changes in cell shape and coordinated movements of cells relative to the CBs begins at the former equator and proceeds to the anterior pole. In contrast to the V. carteri embryo, which starts inversion by opening the cellular monolayer, the V. globator embryo begins folding the cell layer without having a cell sheet with a free edge.
The phialopores in V. carteri and V. globator open in different ways. In V. carteri, a swastika-shaped opening appears, and the four lips of the cell monolayer curl outward and backward [20, 22]. In V. globator, the opening is circular, and there is no curling of the cell layer. In contrast, the opening widens, while the anterior hemisphere moves over the posterior hemisphere (Figures 3F and 8B and Table 1).
In V. carteri (and two other Volvox species), the sporadic movements of the cell monolayer, referred to as denting, have only been observed immediately before inversion [20, 26, 39], while V. globator shows denting both shortly before and shortly after completion of inversion (Figures 6A and 10H, I and Table 1). Denting may be caused by non-simultaneous cell shape changes of individual cells or a patch of a few cells.
In summary, the comparison of type A and type B inverters suggests that both species follow the same basic principle: concerted, spatially and temporally coordinated changes in cellular shapes and concerted migration of cells relative to the CBs connecting them. However, differences exist in almost all details of the inversion process.
Evolution of inversion
When the A and B types of inversion are mapped on the evolutionary tree of volvocine algae (see Additional File 1) [25, 29, 58, 59, 66, 73, 79–83], type B inversion seems to have been the earlier form of Volvox inversion because it appears on a deeper branch than type A inversion. However, if this hypothesis is true, type A inversion must have evolved independently in four different lineages from a type B ancestor [25, 66]. If type A evolved before type B, it would mean that type B inversion evolved independently in three different lineages from a type A ancestor: in the section Volvox lineage, including V. globator, V. rousseletii and V. barberi, and in the lineages leading to V. aureus and to V. dissipatrix. Even if the repeated, independent evolution of type B from type A (or the other way round) is possible, the number of differences observed between type A and type B inverters makes it more reasonable that type A and type B inversion evolved in parallel. However, the true course of evolutionary events remains unclear. The different types of inversion and other differences observed during inversion described above substantiate a polyphyletic origin of the genus Volvox; this conclusion was also reached in earlier studies based on phylogenetic analyses of internal transcribed spacer sequences , sequences of five chloroplast genes [58, 73] and comparison of flagellar beating patterns [83, 84]. Thus, reclassification of this genus is required. A few species of this genus, including V. globator, form a small but robust monophyletic group, the section Volvox. The developmental and morphological differences of the species within the section Volvox compared to other Volvox species outside this section support the creation of a new genus for the species of the section Volvox.
Biomechanical possibilities and implications about the involved tensile and compressive forces: a global mechanistic scenario
Epithelial folding during inversion is basically a biomechanical process whereby individual cells and cohorts of cells produce and respond to forces to generate the complex form of a developing multicellular organism . Based on our results, which are summarized in Figures 12 and 13, and due to biomechanical possibilities and implications about the involved tensile and compressive forces, we developed the following global mechanistic scenario that predicts how a spherical cellular monolayer can turn itself inside out.
Before inversion in the spheroidal V. globator embryo begins, all cells are teardrop shaped (Figures 12A and 13A). This shape suggests that anisotropic cytoskeletal events along their chloroplast-end-to-flagellar-end axes formed these cells (Figure 12A1). The trigger for the beginning of the inversion process seems to be a so-far unknown signaling molecule or morphogen that does not appear to be uniformly distributed throughout the pre-inversion embryo (Figure 13A) but appears to be localized only, or at least mainly, in the posterior hemisphere of the embryo. Therefore, this putative trigger seems to operate only on the teardrop-shaped cells of the posterior hemisphere, which become increasingly spindle shaped (Figures 12B and 13B), while the cells of the anterior hemisphere remain teardrop shaped (Figures 12A and 13B).
The cross-section of spindle-shaped cells is smaller than the cross-section of teardrop-shaped cells (compare Figures 12A1 and 12B1), which may explain the contraction of the posterior hemisphere of the embryo (Figure 13B). This contraction occurs in conjunction with the formation of the bend region somewhat below the equator of the embryo (Figure 13B). Thus, the spherical embryo begins epithelial folding without having a cell sheet with a free edge (in contrast to the V. carteri embryo). In the bend region (Figure 13C), the spindle-shaped cells (Figure 12B) change more and more into paddle-shaped cells (Figure 12D). Simultaneously, these cells seem to move relative to the CBs so that the CBs of paddle-shaped cells eventually are at their chloroplast ends, which face the inner side of the curve (Figures 12D and 13C). The network of CBs appears to be the substrate upon which the coordinated cell shape changes operate to deform the cell sheet. The cell shape conversions together with the movements of cells relative to the CBs seem to progress from the equator of the embryo toward its posterior pole (compare Figure 13B to 13E), and appear to drive inversion of the posterior hemisphere and its simultaneous movement into the anterior hemisphere (Figure 13B, C, D, E, F).
However, how is the signal to change shape and CB positions forwarded to neighboring cells, and how is it coordinated? Once epithelial folding is initiated in the (circular) bend region, a radially symmetrical wave of a trigger molecule or simply of a mechanical force transmission might perpetuate and forward the folding command from cells in the bend region of the embryo toward the posterior pole of the embryo by inducing cell shape changes and movements of cells relative to the CBs in neighboring cells.
What shapes the paddle cells of the bend region? Fundamentally, the paddle-shaped cells (Figure 12D) in the bend region seem to be shaped by anisotropic cytoskeletal events along the chloroplast-end-to-flagellar-end axis (Figure 12D1), which produce strongly elongated cells that get thinner toward the chloroplast end (Figures 12D and 13C). Basically, these cells seem to be radially symmetrical throughout the length of the cell; thus, the cytoskeletal forces in radial directions of the cell seem to be isotropic. However, due to the increasing curvature of the bend region (especially in early inversion), the chloroplast ends of the cells come very close together, and a lack of space seems to arise at these ends of the cells. Finally, the cells appear to get compressed at the chloroplast end; thus, the minor axes of the cross-sections at these ends are only one-third or one-fourth the length of the major axes (Figure 12D3, D4). The smaller the radius of the bend region, the stronger the compression of the chloroplast end of the paddle-shaped cells appears to be. Therefore, the shape of the paddle cells at the chloroplast end (Figure 12D3, D4) seems to reflect an isotropic cytoskeletal activity in radial directions in the context of an anisotropic mechanical environment.
Once inversion of the posterior hemisphere is well advanced and the radius of the curvature in the bend region increases (Figure 13E), the paddle-shaped cells (Figure 12D) change into pencil-shaped cells (Figure 12E). The remaining spindle-shaped cells (Figure 12B) close to the not yet inverted posterior pole never become paddle shaped but directly change into the pencil shape (Figure 13E).
The invagination of the posterior cell sheet seems to generate circumferential tension along the rim of the anterior cap (Figure 13C, D). Therefore, the teardrop-shaped cells (Figure 12A) at the rim of the anterior cap (Figure 13C, D) become increasingly disc shaped (Figure 12C).
What shapes the disc cells? Basically, the disc-shaped cells (Figure 12C) might show a more or less isotropic cytoskeletal activity but, due to tensions on the cell sheet in the anterior-posterior direction of the embryo in response to pulling at the site of bending (Figure 13D), the cells get elongated and flattened (Figures 12C and 13D). Thus, disc-shaped cells seem to be shaped by an anisotropic mechanical environment. This anisotropic mechanical environment has a second consequence: the disc-shaped cells appear to begin to move over the rim of the anterior cap (Figure 13C, D), which seems to be the beginning of the inversion of the anterior hemisphere. The conversion of teardrop-shaped into elongated cells appears to progress in a radially symmetrical wave from the rim of the anterior cap of the embryo toward its anterior pole (compare Figure 13D and 13E). Eventually, tension in the anterior-posterior direction of the embryo produces thinning and elongation of the whole anterior cell layer (Figure 13D, E). It remains unclear whether the movement of the CBs to opposite ends of the disc-shaped cells (Figures 12C2 and 13E) is a passive response to pulling at the site of bending or whether there is an active remodeling of the cytoskeleton including active movement of the CBs; the latter seems more likely because embryonic cells can actively move the CBs .
Disc-shaped cells (Figure 12C) that moved over the rim of the anterior cap (Figure 13D, E) appear to condense into a smaller area beyond the rim, compared to the area they occupied before they rolled over the rim, that is, they reduce their cross-sections at the chloroplast ends and become pencil-shaped cells; simultaneously, these cells also seem to move relative to the CBs so that the CBs eventually are at their chloroplast ends (Figures 12E and 13E). Again, the network of CBs appears to be the substrate upon which the coordinated cell shape changes operate to act on the cell sheet. The conversions from disc to pencil shapes together with the concerted movements of the cells with respect to the CB system seems to maintain the circumferential tension on the rim of the remaining portion of the anterior cap and, as a consequence, on the not yet inverted cell sheet of the anterior hemisphere.
Because more and more disc-shaped cells (Figure 12C) move over the rim, the circumferential tension on the cell sheet of the anterior hemisphere increases continuously. When the remaining disc-shaped cells of the anterior hemisphere and their CBs are stretched to their maximum length, further tension on the anterior hemisphere results in the opening of the phialopore (Figure 13E).
The appearance of a circular opening means that the dominant tensions on the anterior hemisphere are likely to be circumferential. While the phialopore widens (Figure 13E, F, G), both the cells and the CBs around the phialopore as well as submarginal cells in the sheet and their CBs appear to become passively stretched along a circular line described by the edge of the opening (Figures 3F and 8B). However, the phialopore widens dramatically until the diameter of the opening is even greater than the outer diameter of the inverted posterior hemisphere (Figure 13F, G). This expansion of the phialopore cannot be explained only by stretching of the cell sheet; there also seems to be a rearrangement of cells at the phialopore.
The movement of disc-shaped cells (Figure 12C) over the rim of the remaining anterior cap and the conversion of disc-shaped cells into pencil-shaped cells (Figure 12E) continues; thus, the remaining anterior hemisphere appears to glide over the already inverted posterior hemisphere until the anterior cap is completely inverted (compare Figure 13E to 13H). This in-turning of the cell sheet over the surface of the outer layer is comparable to involution, one of the major morphogenetic movements that occur during gastrulation; involution can be observed, for example, in mesoderm migration in the Amphibian gastrula . At the end of inversion, the phialopore gets smaller and smaller (Figure 13H). Relaxation of the previous circumferential tension that occurred during opening of the phialopore might be one reason but is probably not the only reason for this process, there also seems to be a rearrangement of cells at the opening. Finally, the phialopore closes without leaving any visible trace of the previous opening behind (Figure 13H, I).
Right after the completion of inversion, all cells of the embryo change concertedly from pencil (Figure 12E) to column shapes (Figures 12F and 13I). Somewhat later, they develop gradually into gemstone-shaped cells (Figure 12G). Following inversion, the juvenile organism resembles a miniature adult; it will increase in size (without further cell division) by depositing large quantities of ECM.
Both type A and type B inverters must solve the same developmental problem: they begin their lives inside out and must turn their spherical cell monolayer outside in to achieve their adult configuration. Inverters of both types follow the same basic principle: concerted, spatially and temporally coordinated changes in cellular shapes act together with concerted migration of the cells relative to the CB system. However, differences exist in almost all details of the inversion process, suggesting analogous inversion processes that arose through parallel evolution.
Based on our results showing the cellular mechanisms of type B embryonic inversion in V. globator and due to biomechanical possibilities and implications about the involved tensile and compressive forces, we developed a global mechanistic scenario that predicts how a spherical cellular monolayer can turn itself inside out in V. globator. This mechanistic scenario might lay the groundwork for some interesting opportunities to learn how the cell biology, the biomechanical mechanisms of force generation, the dynamic regulation in space and time and the underlying signaling events are integrated such that they produce the global mechanical consequences driving epithelial folding.
Strain and culture conditions
The wild-type Volvox globator Linné strain SAG 199.80 was obtained from the Sammlung von Algenkulturen der Universität Göttingen (Culture Collection of Algae at the University of Göttingen, SAG), Germany . Cultures were grown in standard Volvox medium (SVM)  at 22°C to 23°C under a cycle of 8 h dark/16 h light  with an average of approximately 100 μmol photons m-2 s-1 of photosynthetically active radiation. Small cultures were grown in a growth chamber in 10-mL glass tubes with caps that allow for gas exchange. Larger cultures were grown in a thermostat (COM 7865; Edwards, Kniese & Co., Marburg, Germany) in 1-L glass tubes aerated with sterile air at 150 cm3 min-1.
High-resolution in vivostereo LM
High-resolution in vivo stereo LM was performed using a motorized and automated Leica MZ16A stereomicroscope (Leica Microsystems, Wetzlar, Germany) with fully apochromatic optics and a transmitted light illuminator with cold light sources . In this system, a resolution of up to 840 Lp mm-1 (= 0.6 μm) was obtained. For higher magnifications, an Axioskop 40 FL upright microscope (Carl Zeiss, Oberkochen, Germany) equipped with Achroplan, Fluar and Plan-Neofluar objectives of up to 100× magnification was used. A digital PowerShot S50 camera (Canon, Tokyo, Japan) with a 1/1.8" charge-coupled device sensor was used for photographic documentation.
For all SEM experiments, whole V. globator spheroids were fixed as described below. Using two tungsten needles (Plano, Wetzlar, Germany), the embryos were removed from their mother spheroids and were also removed from their embryonic vesicle under a stereo-microscope. In some experiments, embryos were subsequently fragmented using the tungsten needles. The tungsten needles were sharpened electrolytically . For this step, a carbon electrode was placed into a saturated solution of potassium nitrate containing 10% potassium hydroxide. A tungsten needle was dipped into the solution (30×) while being subjected to low voltage (9.3 V) and alternating current.
Fixation and dehydration of embryos
For LM of sections and for TEM and SEM, spheroids were fixed as described previously  with the following modifications. Fixation was performed in 5% glutaraldehyde (Agar Scientific, Stansted, UK) in SVM for approximately 16 h. Specimens were washed three times with 50 mM phosphate buffer (pH 7.0) for 10 min each and postfixed in 2% osmium tetroxide (Electron Microscopy Sciences, Hatfield, PA) for 1 h.
For LM of sections and for TEM, the fixed spheroids were dehydrated by passage (30 min each) through 30%, 60%, 90% and 100% (2×) ethanol.
For SEM, coverslips were coated with 0.1% polyethylene imine (PEI; Sigma-Aldrich, St. Louis, MO, USA), incubated at 20°C for 15 min, rinsed with deionized water and dried at 20°C. The PEI-coated coverslips were fractured, and a suspension of spheroids containing embryos (approximately 2 μL to 5 μL) was transferred onto a small fragment of a coverslip. The fixed embryos were removed from their mother spheroids and simultaneously from the surrounding embryonic vesicle, as described above. For some experiments, embryos were fragmented (see above). Intact and fragmented embryos were allowed to settle on the same piece of PEI-coated coverslip. The embryos that settled on the coverslip fragment were dehydrated by passage through increasing concentrations of ethanol (see above) and then critical point dried using a Bal-Tec CPD 030 critical point dryer (Leica Microsystems).
For cLSM, intact spheroids were fixed as described previously . Samples were maintained under gentle motion throughout the fixation period using a LD-79 test-tube rotator (Labinco, Breda, Netherlands) at 5 rpm. Spheroids were fixed for 15 min in 3.7% formaldehyde, 0.1 mM dithiothreitol (DTT), 0.1% Triton X-100, 2 mM magnesium chloride, 5 mM ethylene glycol-bis(2-aminoethylether)-N, N, N', N'-tetraacetic acid (EGTA), 150 mM potassium chloride, 10 mM sodium glycerophosphate and 10 mM 4-(2-hydroxyethyl)-1-piperazineethanesulfonic acid (pH 7.0), washed three times for 2 min with 0.1% Tween in phosphate-buffered saline (TPBS) and incubated for 4 h in 1% (tergitol-type) nonyl phenoxypolyethoxylethanol, 1 mM DTT, 1% BSA, 2 mM magnesium chloride, 5 mM EGTA, 150 mM potassium chloride and 10 mM sodium glycerophosphate to extract chlorophyll and minimize autofluorescence. Finally, specimens were washed three times for 5 min each in TPBS.
Embedding and sectioning
For LM of sections and for TEM, the dehydrated specimens were infiltrated in a 1:1 solution of TAAB transmit resin (Agar Scientific) to ethanol (v/v) for 1 h, followed by a 2:1 solution of TAAB transmit resin to ethanol (v/v) for approximately 16 h. After evaporation of the ethanol, specimens were infiltrated twice in pure TAAB transmit resin in an evacuated dessicator for 2 h each. Specimens in resin were transferred to BEEM capsules (Agar Scientific), and the resin was then polymerized through a 16-h exposure at 70°C. The polymerized blocks were removed from the BEEM capsules, and most of the excess resin was trimmed away with a razor blade under a stereo-microscope.
For LM, sections with a thickness of approximately 2 μm were cut with glass knives on a Reichert-Jung Ultracut E ultramicrotome (Reichert Microscope Services, Depew, NY, USA) and transferred to glass slides.
For TEM, sections with a thickness of approximately 80 nm were cut with a diamond knife (6620 SU; Micro Star Diamond Knives, Huntsville, TX, USA) on the Ultracut E ultramicrotome and mounted on 400 mesh copper grids (Plano).
Sections on glass slides (approximately 2 μm in thickness) were stained for LM by incubating the slides in 0.1% toluidine blue (Sigma-Aldrich) for 10 s on a Combimag RCT hot plate stirrer (IKA-Werke, Staufen, Germany) at 70°C. Thereafter, the slides were rinsed in deionized water; the sections were covered with droplets of deionized water; and the slides were placed on the hot plate stirrer until the water had evaporated. The sections were then mounted in Entellan rapid mounting medium (Merck, Darmstadt, Germany).
Sections for TEM (approximately 80 nm in thickness) on grids were stained with 0.1% uranyl acetate (Plano) for 10 s, washed by dipping them in deionized water, stained with 2% lead citrate (Agar Scientific) for 10 s, and washed again with deionized water.
Intact, fixed spheroids for cLSM analysis were stained with 38 μM phalloidin-TRITC (Sigma-Aldrich) in TPBS for 3 h.
Phalloidin-TRITC stains F-actin specifically . In our experiments, phalloidin-TRITC was used primarily as a cytoplasmic stain. While the resolution of the cLSM (Leica TCS SP2; Leica Microsystems) is insufficient to see individual actin filaments, a rough intracellular localization of F-actin is feasible. After phalloidin-TRITC staining, 4 μg/mL 4',6-diamidino-2-phenylindole dihydrochloride (DAPI; Sigma-Aldrich) was added to visualize the nuclei, and incubation continued for 1 h. The spheroids were washed three times in TPBS and allowed to settle on PEI-coated coverslips. Attached spheroids were mounted in 50% glycerol (Merck) in PBS. The specificity of the phalloidin staining was confirmed by comparison of embryos treated only with TRITC-labeled phalloidin with embryos treated with TRITC-labeled phalloidin plus unlabeled phalloidin.
For SEM, critical point-dried specimens were coated with gold in a Bal-Tec SCD 005 cool sputter coating system (Leica Microsystems). The working distance was 50 mm; the current was 30 mA; the argon sputtering pressure was 5 Pa; and the sputtering time was 300 s. The thickness of the gold layer was approximately 35 nm.
LM of sections
Toluidine blue-stained sections (approximately 2 μm in thickness) of embryos were analyzed with an Axioskop 40 FL upright microscope (Carl Zeiss) using oil immersion objectives.
Heavy metal-stained sections (approximately 80 nm) were examined with a Hitachi H-500 TEM (Hitachi, Tokyo, Japan) operated at 75 kV and with a Philips CM-100 TEM (Philips, Eindhoven, Netherlands) operated at 80 kV.
Gold sputter-coated specimens were analyzed with a Hitachi S-450 SEM (Hitachi) operated at 15 kV.
Fixed and stained specimens were examined with an upright Leica TCS SP2 cLSM (Leica Microsystems). DAPI was excited at 405 nm, and the emitted blue fluorescence was detected with a band-pass filter at 430 nm to 490 nm. TRITC was excited at 543 nm, and the emitted red fluorescence was detected with a band-pass filter at 580 nm to 650 nm.
Two-dimensional and 3D modeling
LM, cLSM, SEM and TEM images of intact and sectioned embryos before, during and after inversion were adjusted to the same magnification. In this adjustment, shrinkage during processing (for example, through fixation and dehydration) was taken into account and corrected with the help of images of live material. Adjusted images were screened for the anatomical characteristics of interest and all appropriate images with a non-ambiguous assignment to a certain area of the cell monolayer relative to the anterior and posterior pole of the embryo were selected for further analysis. In these images, contours of cells and nuclei, the position of CBs relative to the cell and the curvature of the cell monolayer were plotted in separate image layers using Photoshop CS5 software (Adobe Systems, San Jose, CA, USA). Contours of cells were assigned to the categories teardrop, spindle, disc, paddle, pencil, column and gemstone shaped. Dimensions (for example, diameters and lengths) and arithmetical means of all dimensions of anatomical characteristics were determined. At least 30 contours of the same anatomical structures were laid on top of the others to develop two-dimensional (2D) and 3D consensus shapes. 3D wireframe modeling and texturing was performed using Blender (version 2.49b) software (Stichting Blender, Amsterdam, Netherlands). 2D vector graphics were developed using CorelDRAW Graphics Suite X5 (version 15) software (Corel, Ottawa, Canada).
bovine serum albumin
confocal laser scanning microscopy/microscope
ethylene glycol-bis(2-aminoethylether)-N, N, N',N'-tetraacetic acid
phosphate buffered saline
scanning electron microscopy/microscope
standard Volvox medium
transmission electron microscopy/microscope
Tween in phosphate-buffered saline
tetramethylrhodamine B isothiocyanate.
Stern CD: Gastrulation: from cells to embryo. 2004, Cold Spring Harbor, NY: Cold Spring Harbor Laboratory Press, 1
Solnica-Krezel L: Conserved patterns of cell movements during vertebrate gastrulation. Curr Biol. 2005, 15: R213-228. 10.1016/j.cub.2005.03.016.
Pilot F, Lecuit T: Compartmentalized morphogenesis in epithelia: from cell to tissue shape. Dev Dyn. 2005, 232: 685-694. 10.1002/dvdy.20334.
Paluch E, Heisenberg CP: Biology and physics of cell shape changes in development. Curr Biol. 2009, 19: R790-799. 10.1016/j.cub.2009.07.029.
Blanchard GB, Kabla AJ, Schultz NL, Butler LC, Sanson B, Gorfinkiel N, Mahadevan L, Adams RJ: Tissue tectonics: morphogenetic strain rates, cell shape change and intercalation. Nat Methods. 2009, 6: 458-464. 10.1038/nmeth.1327.
Watanabe T, Takahashi Y: Tissue morphogenesis coupled with cell shape changes. Curr Opin Genet Dev. 2010, 20: 443-447. 10.1016/j.gde.2010.05.004.
Zartman JJ, Shvartsman SY: Unit operations of tissue development: epithelial folding. Annu Rev Chem Biomol. 2010, 1: 231-246. 10.1146/annurev-chembioeng-073009-100919.
Ettensohn CA: Primary invagination of the vegetal plate during sea urchin gastrulation. Am Zool. 1984, 24: 571-588. 10.1093/icb/24.3.571.
Fristrom D: The cellular basis of epithelial morphogenesis. A review. Tissue Cell. 1988, 20: 645-690. 10.1016/0040-8166(88)90015-8.
Leptin M: Gastrulation movements: the logic and the nuts and bolts. Dev Cell. 2005, 8: 305-320. 10.1016/j.devcel.2005.02.007.
Quintin S, Gally C, Labouesse M: Epithelial morphogenesis in embryos: asymmetries, motors and brakes. Trends Genet. 2008, 24: 221-230. 10.1016/j.tig.2008.02.005.
Keller R, Shook D, Skoglund P: The forces that shape embryos: physical aspects of convergent extension by cell intercalation. Phys Biol. 2008, 5: 015007-10.1088/1478-3975/5/1/015007.
Butler LC, Blanchard GB, Kabla AJ, Lawrence NJ, Welchman DP, Mahadevan L, Adams RJ, Sanson B: Cell shape changes indicate a role for extrinsic tensile forces in Drosophila germ-band extension. Nat Cell Biol. 2009, 11: 859-864. 10.1038/ncb1894.
Wang Y, Steinbeisser H: Molecular basis of morphogenesis during vertebrate gastrulation. Cell Mol Life Sci. 2009, 66: 2263-2273. 10.1007/s00018-009-0018-2.
Rauzi M, Lenne PF: Cortical forces in cell shape changes and tissue morphogenesis. Curr Top Dev Biol. 2011, 95: 93-144. 10.1016/B978-0-12-385065-2.00004-9.
Lye CM, Sanson B: Tension and epithelial morphogenesis in Drosophila early embryos. Curr Top Dev Biol. 2011, 95: 145-187. 10.1016/B978-0-12-385065-2.00005-0.
St Johnston D, Sanson B: Epithelial polarity and morphogenesis. Curr Opin Cell Biol. 2011, 23: 540-546. 10.1016/j.ceb.2011.07.005.
Spence JR, Lauf R, Shroyer NF: Vertebrate intestinal endoderm development. Dev Dyn. 2011, 240: 501-520. 10.1002/dvdy.22540.
Davidson LA: Embryo mechanics: balancing force production with elastic resistance during morphogenesis. Curr Top Dev Biol. 2011, 95: 215-241. 10.1016/B978-0-12-385065-2.00007-4.
Viamontes GI, Kirk DL: Cell shape changes and the mechanism of inversion in Volvox. J Cell Biol. 1977, 75: 719-730. 10.1083/jcb.75.3.719.
Kirk DL, Viamontes GI, Green KJ, Bryant JL: Integrated morphogenetic behavior of cell sheets Volvox as a model. Developmental Order: Its Origin and Regulation. Edited by: Subtelny S, Green PB. 1982, New York: Alan R. Liss, 247-274.
Kirk DL: Volvox: molecular-genetic origins of multicellularity and cellular differentiation. 1998, Cambridge, UK: Cambridge University Press
Kirk DL, Nishii I: Volvox carteri as a model for studying the genetic and cytological control of morphogenesis. Dev Growth Differ. 2001, 43: 621-631. 10.1046/j.1440-169X.2001.00612.x.
Nishii I, Ogihara S, Kirk DL: A kinesin, invA, plays an essential role in Volvox morphogenesis. Cell. 2003, 113: 743-753. 10.1016/S0092-8674(03)00431-8.
Hallmann A: Morphogenesis in the family Volvocaceae: different tactics for turning an embryo right-side out. Protist. 2006, 157: 445-461. 10.1016/j.protis.2006.05.010.
Kelland JL: Inversion in Volvox (Chlorophyceae). J Phycol. 1977, 13: 373-378. 10.1111/j.1529-8817.1977.tb02945.x.
Viamontes GI, Fochtmann LJ, Kirk DL: Morphogenesis in Volvox: analysis of critical variables. Cell. 1979, 17: 537-550. 10.1016/0092-8674(79)90262-9.
Green KJ, Viamontes GI, Kirk DL: Mechanism of formation, ultrastructure, and function of the cytoplasmic bridge system during morphogenesis in Volvox. J Cell Biol. 1981, 91: 756-769. 10.1083/jcb.91.3.756.
Hoops HJ, Nishii I, Kirk DL: Cytoplasmic bridges in Volvox and its relatives. Cell-Cell Channels. Edited by: Baluska F, Volkmann D, Barlow PW. 2005, Georgetown, Texas: Eurekah.com, 1-20. [http://0-www.ncbi.nlm.nih.gov.brum.beds.ac.uk/books/NBK6424/]
Ireland GW, Hawkins SE: Inversion in Volvox tertius: the effects of con A. J Cell Sci. 1981, 48: 355-366.
Pickett-Heaps JD: Some ultrastructural features of Volvox, with particular reference to the phenomenon of inversion. Planta. 1970, 90: 174-190. 10.1007/BF00388045.
Pocock MA: Volvox tertius Meyer. With notes on the two other British species of Volvox. J Quek Micr Club ser 4. 1938, ser. 4, 1: 33-58.
Karn RC, Starr RC, Hudcock GA: Sexual and asexual differentiation in Volvox obversus (Shaw) Printz, strains Wd3 and Wd7. Arch Protistenkd. 1974, 116: 142-148.
Ransick A: Reproductive cell specification during Volvox obversus development. Dev Biol. 1991, 143: 185-198. 10.1016/0012-1606(91)90065-B.
Darden WH: Sexual differentiation in Volvox aureus. J Protozool. 1966, 13: 239-255. 10.1111/j.1550-7408.1966.tb01901.x.
Janet C: Le Volvox. Troisième Mémoire. Ontogénèse de la blastéa volvocéenne. Première partie. 1923, Mâcon: Protat Frères, 3: [Études sur les fourmis, les guêpes et les abeilles, vol 35.], [http://www.archive.org/stream/levolvox351923jane/levolvox351923jane_djvu.txt]
Zimmermann W: Die ungeschlechtliche Entwicklung von Volvox. Naturwissenschaften. 1925, 19: 397-402. [http://0-dx.doi.org.brum.beds.ac.uk/10.1007/BF01560949]
Pocock MA: Volvox in South Africa. Ann South Afr Mus. 1933, 16: 523-646.
McCracken MD, Starr RC: Induction and development of reproductive cells in the K-32 strains of Volvox rousseletii. Arch Protistenkd. 1970, 112: 262-282.
McCracken MD: Differentiation in Volvox. Carolina Tips. 1970, 33: 37-38.
Nozaki H, Itoh M: Phylogenetic relationships within the colonial Volvocales (Chlorophyta) inferred from cladistic analysis based on morphological data. J Phycol. 1994, 30: 353-365. 10.1111/j.0022-3646.1994.00353.x.
Kikuchi K: Cellular differentiation in Pleodorina californica. Cytologia (Tokyo). 1978, 43: 153-160. 10.1508/cytologia.43.153.
Gottlieb B, Goldstein ME: Colony development in Eudorina elegans (Chlorophyta, Volvocales). J Phycol. 1977, 13: 358-364. 10.1111/j.1529-8817.1977.tb02942.x.
Hartmann M: Über die Veränderung der Koloniebildung von Eudorina elegans und Gonium pectorale unter dem Einfluss äußerer Bedingungen. IV. Mitt. der Untersuchungen über die Morphologie und Physiologie des Formwechsels der Phytomonadinen (Volvocales). Arch Protistenkd. 1924, 49: 375-395.
Marchant HJ: Colony formation and inversion in the green alga Eudorina elegans. Protoplasma. 1977, 93: 325-339. 10.1007/BF01275663.
Doraiswami S: On the morphology and cytology of Eudorina indica Iyengar. J Ind Bot Soc. 1940, 19: 113-139.
Taft CE: Inversion of the developing coenobium in Pandorina morum Bory. Trans Am Microsc Soc. 1941, 60: 327-328. 10.2307/3222827.
Iida H, Nishii I, Inouye I: Embryogenesis and cell positioning in Platydorina caudata (Volvocaceae, Chlorophyta). Phycologia. 2011, 50: 530-540. 10.2216/10-80.1.
Stein JR: A morphologic and genetic study of Gonium pectorale. Am J Bot. 1958, 45: 664-672. 10.2307/2439502.
Stein JR: On cytoplasmic strands in Gonium pectorale (Volvocales). J Phycol. 1965, 1: 1-5. 10.1111/j.1529-8817.1965.tb04547.x.
Powers JH: Further studies on Volvox, with description of three new species. Trans Am Microsc Soc. 1908, 28: 141-175. [http://0-www.jstor.org.brum.beds.ac.uk/stable/3220908]
Kuschakewitsch S: Zur Kenntnis der Entwicklungsgeschichte von Volvox. Arch Protistenkd. 1931, 73: 323-330.
Kuschakewitsch S: Zur Kenntnis der Entwicklungsgeschichte von Volvox. Bull de l'Acad d Sc de l'Oukraine. 1922, 1: 31-36.
Pocock MA: Volvox and associated algae from Kimberley. Ann South Afr Mus. 1933, 16: 473-521.
Metzner J: A morphological and cytological study of a new form of Volvox-I. Bull Torrey Bot Club. 1945, 72: 86-113. 10.2307/2481267.
Kochert G: Differentiation of reproductive cells in Volvox carteri. J Protozool. 1968, 15: 438-452.
Starr RC: Control of differentiation in Volvox. Dev Biol Suppl. 1970, 4: 59-100.
Nozaki H: Origin and evolution of the genera Pleodorina and Volvox (Volvocales). Biologia (Bratisl). 2003, 58: 425-431.
Herron MD, Hackett JD, Aylward FO, Michod RE: Triassic origin and early radiation of multicellular volvocine algae. Proc Natl Acad Sci USA. 2009, 106: 3254-3258. 10.1073/pnas.0811205106.
Hoops HJ: Somatic cell flagellar apparatuses in two species of Volvox (Chlorophyceae). J Phycol. 1984, 20: 20-27. 10.1111/j.0022-3646.1984.00020.x.
Larson A, Kirk MM, Kirk DL: Molecular phylogeny of the volvocine flagellates. Mol Biol Evol. 1992, 9: 85-105.
Nozaki H, Itoh M, Sano R, Uchida H, Watanabe MM, Kuroiwa T: Phylogenetic relationships within the colonial Volvocales (Chlorophyta) inferred from rbcL gene sequence data. J Phycol. 1995, 31: 970-979. 10.1111/j.0022-3646.1995.00970.x.
Coleman AW: Phylogenetic analysis of «Volvocaceae» for comparative genetic studies. Proc Natl Acad Sci USA. 1999, 96: 13892-13897. 10.1073/pnas.96.24.13892.
Nozaki H, Ohta N, Takano H, Watanabe MM: Reexamination of phylogenetic relationships within the colonial Volvocales (Chlorophyta): an analysis of atpB and rbcL gene sequences. J Phycol. 1999, 35: 104-112. 10.1046/j.1529-8817.1999.3510104.x.
Nozaki H, Takahara M, Nakazawa A, Kita Y, Yamada T, Takano H, Kawano S, Kato M: Evolution of rbcL group IA introns and intron open reading frames within the colonial Volvocales (Chlorophyceae). Mol Phylogenet Evol. 2002, 23: 326-338. 10.1016/S1055-7903(02)00030-1.
Hallmann A: Evolution of reproductive development in the volvocine algae. Sex Plant Reprod. 2011, 24: 97-112. 10.1007/s00497-010-0158-4.
Smith GM: A comparative study of the species of Volvox. Trans Am Microsc Soc. 1944, 63: 265-310. 10.2307/3223302.
Nozaki H, Ito M, Sano R, Uchida H, Watanabe MM, Takahashi H, Kuroiwa T: Phylogenetic analysis of Yamagishiella and Platydorina (Volvocaceae, Chlorophyta) based on rbcL gene sequences. J Phycol. 1997, 33: 272-278. 10.1111/j.0022-3646.1997.00272.x.
Nozaki H, Ott FD, Coleman AW: Morphology, molecular phylogeny and taxonomy of two new species of Pleodorina (Volvoceae, Chlorophyceae). J Phycol. 2006, 42: 1072-1080. 10.1111/j.1529-8817.2006.00255.x.
Green KJ, Kirk DL: Cleavage patterns, cell lineages, and development of a cytoplasmic bridge system in Volvox embryos. J Cell Biol. 1981, 91: 743-755. 10.1083/jcb.91.3.743.
Kirk DL: The ontogeny and phylogeny of cellular differentiation in Volvox. Trends Genet. 1988, 4: 32-36. 10.1016/0168-9525(88)90063-7.
Nishii I, Ogihara S: Actomyosin contraction of the posterior hemisphere is required for inversion of the Volvox embryo. Development. 1999, 126: 2117-2127.
Herron MD, Michod RE: Evolution of complexity in the volvocine algae: transitions in individuality through Darwin's eye. Evolution. 2008, 62: 436-451. 10.1111/j.1558-5646.2007.00304.x.
Ueki N, Nishii I: Controlled enlargement of the glycoprotein vesicle surrounding a Volvox embryo requires the InvB nucleotide-sugar transporter and is required for normal morphogenesis. Plant Cell. 2009, 21: 1166-1181. 10.1105/tpc.109.066159.
Janet C: Note préliminaire sur l'oeuf du Volvox globator. 1914, Limoges: Ducourtieux et Gout
Coggin SJ, Kochert G: Flagellar development and regeneration in Volvox carteri (Chlorophyta). J Phycol. 1986, 22: 370-381. 10.1111/j.1529-8817.1986.tb00038.x.
Kirk DL, Birchem R, King N: The extracellular matrix of Volvox: a comparative study and proposed system of nomenclature. J Cell Sci. 1986, 80: 207-231.
Hallmann A: Extracellular matrix and sex-inducing pheromone in Volvox. Int Rev Cytol. 2003, 227: 131-182. 10.1016/S0074-7696(03)01009-X.
Nozaki H, Ito M, Uchida H, Watanabe MM, Kuroiwa T: Phylogenetic analysis of Eudorina species (Volvocaceae, Chlorophyta) based on rbcL gene sequences. J Phycol. 1997, 33: 859-863. 10.1111/j.0022-3646.1997.00859.x.
Sachs JL: Resolving the first steps to multicellularity. Trends Ecol Evol. 2008, 23: 245-248. 10.1016/j.tree.2008.02.003.
Herron MD, Desnitskiy AG, Michod RE: Evolution of developmental programs in Volvox (Chlorophyta). J Phycol. 2010, 46: 316-324. 10.1111/j.1529-8817.2009.00803.x.
Lerche K, Hallmann A: Stable nuclear transformation of Gonium pectorale. BMC Biotechnol. 2009, 9: 64-10.1186/1472-6750-9-64.
Ueki N, Matsunaga S, Inouye I, Hallmann A: How 5000 independent rowers coordinate their strokes in order to row into the sunlight: phototaxis in the multicellular green alga Volvox. BMC Biol. 2010, 8: 103-10.1186/1741-7007-8-103.
Solari CA, Drescher K, Goldstein RE: The flagellar photoresponse in Volvox species (Volvocaceae, Chlorophyceae). J Phycol. 2011, 47: 580-583. 10.1111/j.1529-8817.2011.00983.x.
Keller R, Davidson LA, Shook DR: How we are shaped: the biomechanics of gastrulation. Differentiation. 2003, 71: 171-205. 10.1046/j.1432-0436.2003.710301.x.
Winklbauer R, Nagel M, Selchow A, Wacker S: Mesoderm migration in the Xenopus gastrula. Int J Dev Biol. 1996, 40: 305-311.
Schlösser UG: SAG-Sammlung von Algenkulturen at the University of Göttingen, Catalogue of Strains 1994. Bot Acta. 1994, 107: 111-186.
Provasoli L, Pintner IJ: Artificial media for fresh-water algae: problems and suggestions. The Ecology of Algae, a symposium held at the Pymatuning Laboratory of Field Biology on June 18 and 19, 1959. Edited by: Tryon CA, Hartman RT. 1959, Pittsburgh, PA: Pymatuning Laboratory of Field Biology, University of Pittsburgh, 84-96. [The Pymatuning Symposia in Ecology, Special Publication No. 2.]
Starr RC, Jaenicke L: Purification and characterization of the hormone initiating sexual morphogenesis in Volvox carteri f. nagariensis Iyengar. Proc Natl Acad Sci USA. 1974, 71: 1050-1054. 10.1073/pnas.71.4.1050.
Brady A: A simple technique for making very fine, durable dissecting needles by sharpening tungsten wire electrolytically. Bull World Health Organ. 1965, 32: 143-144.
We thank Dr. U. Kahmann for expert advice in the course of the electron microscopy studies and K. Puls for technical assistance. This work was supported in part by a grant from the FAZIT-Stiftung (to SH). We acknowledge support of the publication fee by Deutsche Forschungsgemeinschaft and the Open Access Publication Funds of Bielefeld University.
SH conducted the experiments and analyzed the data. AH conceived and coordinated the study, critically evaluated the data, and wrote the manuscript. Both authors read and approved the final manuscript.
Electronic supplementary material
Additional file 1: . An evolutionary tree of volvocine algae based on the nucleotide sequences of five chloroplast genes. This phylogenetic analysis indicates that multicellularity evolved only once in this group. There are two fundamentally different sequences through which embryos of the genus Volvox turn right-side out: type A and type B inversion. The type of inversion is indicated for all species of the genus Volvox. (PDF 3 MB)
Authors’ original submitted files for images
Below are the links to the authors’ original submitted files for images.
About this article
Cite this article
Höhn, S., Hallmann, A. There is more than one way to turn a spherical cellular monolayer inside out: type B embryo inversion in Volvox globator. BMC Biol 9, 89 (2011). https://0-doi-org.brum.beds.ac.uk/10.1186/1741-7007-9-89
- Cell Sheet
- Posterior Pole
- Inversion Process
- Anterior Pole
- Cell Shape Change